Pelgrim GK3104ONY Anleitung Seite 67

faUlts
Fault
The burner does not burn
evenly.
The burner goes out after
igniting.
Cause
Burner parts incorrectly
installed.
Burner parts dirty or damp.
Wrong type of gas used.
Control knob not kept
pressed in long enough.
Solution
Assemble the burner parts
using the centring ridges.
Clean and dry the burner
parts, making sure that the
outflow holes are open.
Check that the gas used is
suitable for the appliance. If
not, contact your gas fitter.
Keep the control knob
pressed in for at least
5 seconds.
GB 13