Care And Cleaning - Kenwood TT300 Serie Bedienungsanleitung

G
To warm toast that's popped up but
gone cold, lower the toast then
press the 'reheat' button. Its light will
come on.
G
To stop toasting at any stage, press
the 'cancel' button.
4 Your toast will pop up automatically.
To raise it higher, lift the lever.
hints on using your
toaster
G
Select a lower setting for light
browning, for toasting one slice only
or for dry bread.
G
Dry/stale bread toasts more quickly
than fresh bread and thinly sliced
bread toasts more quickly than
thickly sliced bread. Therefore the
browning control should be set at a
lower setting than usual.
G
For best results ensure that the
bread slices are of an even
thickness, freshness and size.
G
In order to achieve uniform browning
we recommend you wait a minimum
of 30 seconds between each
toasting so that the control can
automatically reset. Alternatively
select a lower setting when
additional toasting is carried out.
to use the warming rack
1 Place warming rack on top of toaster
.
2 Put your food on the rack (slice thick
items in half to stop their outsides
burning). Watch to make sure it
doesn't burn, and turn it over half
way through.
3 Set the browning control to 1, 2 or
- but no higher than
4 Lower the lever.
5 The lever will automatically rise at the
end of the warming cycle.

care and cleaning

1 Before cleaning, unplug your toaster
and let it cool down.
2 Slide out the crumb tray
then replace. Do this regularly:
crumbs can smoke or even burn.
3 Wipe the outside of the toaster with
a damp cloth, then dry.
service
G
If the cord is damaged it must, for
safety reasons, be replaced by
KENWOOD or an authorised
KENWOOD repairer.
If you need help with:
G
using your toaster or
G
servicing or repairs
G
Contact the shop where you bought
your toaster.
.
3
. Clean,