Structure; Overview; Control Panel; Initial Startup - Nedo CrossLiner 3 Bedienungsanleitung

4

Structure

4.1

Overview

1 Laser exit window for second vertical
beam, offset by 90°
2 Two opposed threaded bushings for
wall mount
3 Battery compartment
4

Control panel

5 Laser exit window - horizontal and
vertical beam
6 Compensator lock for transportation
4.2 Control panel
1
2
3
4 Switches the vertical beams
5

Initial Startup

When starting up the CrossLiner 3 for the first time, insert the 3 batteries supplied as shown into
the battery compartment (see chapter 6.1).
6

Power Supply

6.1

Insert/replace batteries

The CrossLiner 3 requires 3 batteries, 1.5 V
(AA).
• Open battery compartment cover
• Insert/replace batteries as specified.
Ensure pole direction is correct!
• Close battery compartment cover
1 Battery compartment cover
CrossLiner 3 Operating Instructions
"H" ON/OFF switch
Switches the horizontal
beam on and off.
LED display "H"
Lights up when horizontal
beam is activated
"
LED display "IV
Lights up when vertical
beams are activated
"IV" ON/OFF switch
on and off.
3
2
1
2
1
1
13
EN
4
5
6
3
4