Laserworld RTI-Nano RGB Series Bedienungsanleitung Seite 8

Manual: RTI Nano RGB Series
Pin Signal
1 x-axis scanner, positive signal. Difference of 10V
2 y-axis scanner, positive signal. Difference of 10V
3 intensity/brightness, positive signal. Difference of 5V
4 & 17 Interlock. Linking of both enables output
5 red intensity, positive signal. Difference of 5V
6 green intensity, positive signal. Difference of 5V
7 blue intensity, positive signal. Difference of 5V
9 yellow intensity, positive signal. Difference of 5V (depending on the version)
10 cyan intensity, positive signal. Difference of 5V (depending on the version)
OR: DMX512 IN; positive signal (Showeditor and Phoenix interfaces).
11 DMX512 OUT; positive signal (depending on the version)
13 Shutter. Difference of 5V
14 x-axis scanner, negative signal. Difference of 10V
15 x-axis scanner, positive signal. Difference of 10V
16 intensity/brightness, negative signal. Difference of 5V
18 red intensity, negative signal. Difference of 5V
19 green intensity, negative signal. Difference of 5V
20 blue intensity, negative signal. Difference of 5V
22 yellow intensity, negative signal. Difference of 5V
23 cyan intensity, negative signal. Difference of 5V
OR: DMX512 IN; negative signal
24 DMX512 OUT; negative signal
25 Ground
After connecting select „LASER ON - ILDA IN" on the Remote Control Pad.
page 8 / 24
DB-25 ILDA connector