Herunterladen Inhalt Inhalt Diese Seite drucken

Service Notes - Laserworld RTI-Nano RGB Series Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

chines) on the same mains!
11. Ensure sufficient ventilation and do not
place the device on any warm or heat ra-
diating surface. Especially the ventilati-
on openings must not be covered!
12. Ensure that device does not get over-
heated. Make sure that the device is not
exposed to spotlights (especially moving
4. Working on the device
1. Be sure that the mains plug is not connected to the power sup-
ply while installing or opening the device (e.g. for cleaning).
2. Take off all reflecting things like rings, watches etc. before
starting to work with or at the projector.
3. Only use non-reflecting tools to work on device.
4. Wear protective clothing (like goggles, gloves etc.) accor-
ding to laser power and wavelength of the laser.

5. Service notes

Moisture and heat can reduce lifetime of
the laser system dramatically and expires
any warranty claim.
Quick on/off switching of device can re-
duce durability of the laser diode drama-
tically.
Avoid concussions during transport.
To increase durability of your laser,
protect device against overheating:
-
Always ensure sufficient ventilation.
-
Do not face spotlights (especially mo-
ving heads) to the device.
-
Check temperature after approx. 30
minutes with each new installation.
If necessary install the projector at a
place with different temperature.
-
the device is according IP65 water-
Manual: RTI Nano RGB Series
heads). Heat of spotlights could overheat
laser in a little while and leads to a degra-
dation of performance.
proof. Nevertheless please make sure,
that water can't get into the device,
or the power or data connections.
Please check the connections.
-
Switch off device when it is not nee-
ded. Diodes are switched on and can
wear off even if there is no visible la-
ser output.
As for troubleshooting, please check the
FAQ on our website www.laserworld.com
• Removal of the warranty label as well
as damages to the device caused by
improper handling, neglect of the sa-
fety instructions and service notes will
void the warranty.
page 5 / 24

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis