Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
About This Guide
The Ground Support 2 Kit Quick Reference Guide (QRG) has basic product information such as setup and mounting
diagrams. Download the User Manual from
Disclaimer
The information and specifications contained in this QRG are subject to change without notice.
LIMITED WARRANTY
FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND CONDITIONS PLEASE VISIT OUR WEBSITE.
For Customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration.
For Customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and
Germany: www.chauvetlighting.eu/warranty-registration.
Chauvet warrants that this product shall be free from defects in material and workmanship under normal use, for the
period specified in, and subject to the exclusions and limitations set forth in the full limited warranty on our website. This
warranty extends only to the original purchaser of the product and is not transferable. To exercise rights under this
warranty, you must provide proof of purchase in the form of an original sales receipt from an authorized dealer that shows
the product name and date of purchase. THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES. This
warranty gives you specific legal rights. You may also have other rights that vary from state to state and country to
country. This warranty is valid only in the United States, United Kingdom, Republic of Ireland, Belgium, the Netherlands,
Luxembourg, France, Germany and Mexico. For warranty terms in other countries, please consult your local distributor.
Safety Notes
These Safety Notes include important information about installation, use, and maintenance.
•
This product contains no user-serviceable parts.
•
When selecting an installation location, consider ease of access for operation and routine maintenance of attached
panels.
•
This product is for indoor use only! To prevent risk of fire or shock, do not expose this product to rain or moisture
(IP20).
•
Make sure the floor structure is stable and immobile.
•
DO NOT use the kit if any welded joints are cracked or appear damaged in any way.
•
The ballast weights stated in this specification are for indoor usage only. If this kit is used outdoors, the unit must
be protected from wind and additional ballast (as determined by a qualified and competent rigger) must be used.
•
This product should only be used by competent and qualified individuals.
Contact
Outside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico, contact your distributor to request support or
return a product. Refer to
What is Included
•
Floor Base (x2)
•
Angling Horizontal Bar (x2)
•
Angling 1M Pipe with 2 clamps (x3)
•
1M Ladder Truss with Spigots, Pins, and Safety Clips (x6)
•
Panel Attachment Arm (x6)
•
TR16 Screw Jacks (x10)
•
M12 Panel Attachment Screws (x12)
•
Quick Reference Guide
The Ground Support 2 Kit is shipped in the road case.
Product Description
The Ground Support 2 Kit is a complete ground support solution for stacking F-Series Video Panels as a video wall on
the floor. Multiple kits can be used to stack wider video walls. The Ground Support 2 Kit can accommodate flat and
concave video walls, including a 5° or 10° curve (kit sold separately). The DRB-F100CM or DRB-F50CM dual function rig
bars are required for operation.
Add lubricant to the metal parts regularly to ensure optimum performance and prevent rust and
corrosion. Take special care that no excess lubricant drips or leaks onto the attached video panels.
1
QUICK REFERENCE GUIDE
www.chauvetvideo.com
Contact Us
at the end of this QRG for contact information.
for more details.
Ground Support 2 Kit QRG Rev. 4
Werbung
Inhaltsverzeichnis
