Siemens PS791-1PRO Betriebsanleitung Seite 19

Figure 2: The Parts of the Cable Socket for 110...230 V AC
A Socket with union nut
B Socket sleeve
C Seal
D Cable bushing screw
To connect to the line voltage, use a three-core cable with 0.5 - 2.5 mm²
core cross-sectional area and 6 - 9.5 mm outer diameter.
Follow the steps below to connect the cable socket to a power supply ca-
ble.
1. Unscrew the socket sleeve from the socket. Open the strain relief
clamp.
2. Remove the cable bushing screw along with the seal from the socket
sleeve.
Operating Instructions (Compact) PS791-1PRO
A5E00288912-05
English
19