Wohler CDL 110 Bedienungsanleitung Seite 44

Setup
Fig. 14: 12 hour or 24 hour display
Fig. 15: Setting the hour (clock)
44
Repeat the steps described above for setting
•
the date (day) in P3.3 mode. Press SET-key
to save the settings and enter P3.4 mode or
press ESC to return to P3.0 mode without sav-
ing.
In P3.4 mode the current time setting (12 hour
•
or 24 hour) will blink (Fig. 14). To change the
setting press ▲ or MIN/MAX▼.
• Press SET to save the settings and enter P3.5
mode to set the hours, Fig. 15. Press Set to
save and enter P 3.6 mode to set the minutes
or press ESC to return to P3.0 mode without
saving.
Repeat the steps described above and save
•
your settings with the SET-key.
NOTE!
The CDL 110 has an internal rechargeable battery
that provides power to the clock. It takes at least
24 hours to charge this battery with the power
supply. In case of a voltage interruption, that is
when the power supply is unplugged, the internal
battery will provide power to the clock during 10
hours.