What To Do If - Leonard LAM6000E Benutzerinformation

22 leonard
nium foil to prevent damage the top during
operation.
Stainless steel parts wash with water, and
then dry with a soft cloth.
Scratches or dark stains have no effect
on how the appliance operates.
Removing the dirt:
1. Use the fine scouring powder or a
scouring pad to remove the dirt.
2. Clean the appliance with a damp cloth
and some detergent.

WHAT TO DO IF...

Problem
The appliance does not oper-
ate.
The cooking zone does not
heat up.
The effectiveness of the hob is
not satisfactory.
3. Heat the hotplate to a low temperature
4. To maintain the hotplates, wipe the
Important! For stainless steel edges of the
hob use cleaner for stainless steel.
Possible cause and remedy
• Examine the fuse in the electrical system of the house in the
fuse box. If the fuses blow time after time, speak to an author-
ised electrician.
• Make sure that the appliance is plugged in and the electrical
supply is switched on.
• Make sure that you turn the correct control knob.
• Examine the fuse in the electrical system of the house in the
fuse box. If the fuses blow time after time, speak to an author-
ised electrician.
• Make sure that the hob is clean and dry.
• Make sure that the cookware is the correct size for the cooking
zone.
• Make sure that the cookware has a flat bottom.
• Make sure that the heat setting is correct for this type of cook-
ing.
and leave to dry.
plates with a drop of olive oil on a kitch-
en towel to prevent rust.
The stainless steel edge of the plate
can be slightly discoloured as a result
of the thermal load.