Problems And Solutions - AEG CTV 4823 DVD Bedienungsanleitung

Maintenance & Troubleshooting

Problems and Solutions

Problems
Picture distortion.
Brightness
unstable or noisy.
The player does
not work.
No response to
key press.
Remote control
does not work.
Please Note:There are a number of different recording and compression methods, as well
as quality differences between CDs and self-recorded CDs.
Furthermore, the music industry does not adhere to fixed standards (copy protection).
For these reasons it is possible that in rare cases there are problems with the playback of
CDs and MP3 CDs. This is not a malfunction of the device.
Note:
This produce incorporates copyright protection technology that is protected by method
claims of certain. of certain U.S. patent and other intellectual Property rights owned by
Macrovision corporation and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation and is intended for home and
other limited viewing users only, unless otherwise authorized by Macrovision corporation.
Reverse engineering or disassembly is prohibited.
Cause
Disc is dirty.
Fast forward/backward is activated.
Affected by anti-piracy.
No disc.
Disc not compatible.
The disc is placed upside down.
The disc not put in the tray correctly.
Disc is dirty.
Player setting are incorrect.
Parental lock is activated.
Interference of power wave or other
factors such as static interference.
The remote control not pointed at the
remote sensor on the front panel of the
player.
The remote control is out of specified
range.
Battery power exhausted.
The remote control is adjusted to the
other key surface.
Solution
Take out the disc and clean it.
The picture may be distorted during fast
forward /backward playback.
Load a original CD/DVD disc.
Load a disc.
Load a compatible disc (Check the disc
format and its colour system).
Load a compatible disc (Check the disc
format and its colour system).
Check disc is put in correctly.
Clean the disc.
Change the setting via the setup menu.
Disable this function or reset the rating level.
Turn off the main switch or pull out the power
plug, plug it in and turn on the power again.
Point the remote control at the remote
sensor.
Make sure the remote control range within 7
meters to the remote sensor.
Replace with new batteries.
Press the "DVD" or "TV" button to change the
key surface.
-50-