Start-Up; Rs-485 Address Allocation; Overview Of The Different Options For Address Allocation - Honeywell luminAXS Serie Montage, Anschluss, Anleitung

Mounting and Connection Instructions Reader series "luminAXS"
7.

Start-up

7.1 RS -485 address allocation
7.1.1

Overview of the different options for address allocation

State of delivery: Address "0" is set.
Every reader operated at the RS-485 module bus must have its
in the system prevents addresses from being allocated several times.
Possible address range:
The allocation of the addresses varies. The following information is intended to assist you in
choosing the best methods for your special requirement. A detailed description on the individual
methods can be found in the following chapters.
1.) Manually via the central control unit (s
Enter the serial number of the
central control unit. The address is then stored in the
Recommended standard method.
2.) Automatically with data carrier see
Start the process with a data carrier in the reading area of the
allocated automatically and then stored in the
mode is active, several
Recommendation:
Suitable for shorter distances between the central control unit and the individual
( Manual input of the serial numbers of the
3.) Manu ally via IQ DeviceInstaller and configuration tool usb
The allocation of an address takes place via IQ DeviceInstaller and the configuration tool usb.
Recommendation:
Suitable, if a reader should be allocated a particular address locally.
ATTENTION:
4 .) Manu ll a y via reader
Only the operating voltage requires connecting at the
must not be active, neither is a connection to the ACS-8 necessary.
An address is allocated via the keypad at the
Recommendation:
When servicing or testing.
ATTENTION A plausibility check is not possible
depending on the controller.
reader
(
reader s can be automatically allocated addresses in succession.
A plausibility check is not possible
keypad - stand alone
:
ee 7.1. ) 4
plus the desired address via the programming of the
reader
7.1. ) 5
reader
reader s is not required).
!
operating mode
reader
reader .
!
own address. A p lausibilit
.
reader . The address is
. As long as the address allocation
(see 7.1.6)
(s ee 7.1. ) 7
. The address allocation mode
37
y check
reader s.