Appendix; Troubleshooting - Hyundai E260D Bedienungsanleitung

Troubleshooting

How can I install an
TV screen is not clear after
installing an indoors
How can I view cable
Neither picture nor
sound comes up.
Picture turns on slowly
after power is on.
Picture is distorted or frozen
while watching digital
Input Source information
only appears on black
Poor reception on some
Black and white on some
TV won't turn on.
Screen is too bright or too
Auto On does not work.
Downloaded from www.Manualslib.com
Symptom
Possible solution
Refer to page 13.
antenna?
Indoors antenna may experience poor reception due to surrounding buildings. Please
install an outdoors antenna or wireless antenna.
antenna.
Please install a cable broadcasting receiver (Converter).
broadcasting?
Symptom
Possible solution
Check whether power is on.
Check whether the power is cut or whether the power cord is properly connected.
Try to plug another product's power cord to the same outlet to check the outlet itself.
This symptom is not a malfunction. This delay is designed to prevent the distorted and
noisy picture when the power is on. However, if the picture does not appear more than
5 minutes after the power is on, call a service center.
This symptom may be caused by weak reception. Contact your local station or cable
company.
broadcasting.
Check whether your TV is properly connected to external devices.
screen.
Check whether you selected proper channels. Try re-orienting your antenna. Ensure
channels.
LNA is activated.
Check other channels for black and white screen. Adjust colour.
channels.
Ensure the power cord is plugged.
Adjust brightness.
dark.
Ensure to use the remote control or power button on the product to turn off your TV. If
you unplug the power cord, the stand-by consumption power becomes 0 (zero), which
causes the programmed time to be erased.
manuals search engine

Appendix

44