How To Check Channel State - Hyundai E260D Bedienungsanleitung

DTV Channel Setup

How to Check Channel State

Users can check parameters of certain channels and scan them.
35
Downloaded from www.Manualslib.com
11
Press
selected Channel.
12
Press Up and Down buttons to move to "Scan".
Press
13
following menu showing the scanning process.
After scanning process, the first channel of scanned channel will be displayed.
14
Press EXIT button to TV viewing or press MENU button to return to the previous
menu.
✓ If the scan fails, please check whether your entered values are correct or not
and the signal reception sensitivity is good or bad.
1 Press MENU button.
Menu items appear on the screen.
2
Press
Press
3
"AUTO SCAN" is highlighted.
4
Press
Press
5
Tuner State menu appears.
6
Press
Press EXIT button to TV viewing or press MENU button to return to the previous
7
menu.
♦ Level : Indicating selected network signal strength level.
♦ Quality : Indicating signal to noise ratio.
✓ When the channel is selected, you can check the reception status of the signal.
If the reception signal status is bad, adjust antenna to get the following result.
manuals search engine
/ buttons to select "Bandwidth", and set the proper value for the
buttons to store all the entered channel data. Then you can get the
/ Buttons to move to "DTV CHANNEL" icon.
button to select "DTV CHANNEL" Icon.
/ Buttons to move to "CHANNEL STATE" icon.
buttons to select CHANNEL STATE"
/ buttons to select the channel you want.
♦ Tuner : Lock
♦ Level : over 30%
♦ FEC : 1/2, 2/3, 3/4, 5/6 or 7/8
♦ Quality : over 40%