Display Serial Number; Setting Decimal Point (Data Logger Version Only) - STAUFF SPG-DIGI Bedienungsanleitung

4.12

Display serial number

1
Press the ZERO/MENU key for 2 s.
2
Press the ZERO/MENU key repeatedly until the serial number
is shown on the display.
4.13

Setting decimal point (data logger version only)

1
Press key MIN/MAX/FS for 2 s.
2
Press RES/OK/REC key until COMMA or POINT appears.
3
ZERO/MENU key to change the decimal point used.
4
Press RES/OK/REC key to exit the menu.
Ä Decimal point is changed.
V1.0/01/20
Operation
Serial number
Seriennummer
Software version
Softwareversion
25