3B LASER PEN 200 mW Gebrauchsanleitung Seite 70

The „3B LASER PEN 200 mW" laser system is intended for use in an electromagnetic environment in which radiated RF dis-
turbances are controlled. The customer or the user of the „3B LASER PEN 200 mW" laser system can help prevent electro-
magnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment
(transmitters) and the „3B LASER PEN 200 mW" laser system as recommended below, according to the maximum output
power of the communications equipment.
Rated maximum output
power of transmitter
W
0,01
0,1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in metres
(m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output
power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflec-
tion from structures, objects and people.
72 72
Downloaded from www.Manualslib.com
Separation distance according to frequency of (in m)
150 kHz to 80 MHz
0,12
0,38
1,2
3,8
12
manuals search engine
80 MHz to 800 MHz 800 MHz to 2,5 GHz
0,12 0,23
0,38 0,73
1,2 2,3
3,8 7,3
12 23
Last revised 16.02.12