Weekly Timer Operation; Setting The Weekly Timer - Mitsubishi Electric MSZ-SF15VA Bedienungsanleitung

● OPERATING INSTRUCTIONS
W
EEKLY TIMER OPERATION
• A maximum of 4 ON or OFF timers can be set for individual days of the week.
• A maximum of 28 ON or OFF timers can be set for a week.
Note:
The simple ON/OFF timer setting is available while the weekly timer is on. In
this case, the ON/OFF timer has priority over the weekly timer; the weekly timer
operation will start again after the simple ON/OFF timer is complete.

Setting the weekly timer

* Make sure that the current time and day are set correctly.
1
Press
2
Press
Pressing
the week to be set.
* All days can be selected.
En-7
Downloaded from www.Manualslib.com
●
to enter the weekly timer setting mode.
* blinks.
and to select setting day and number
E.g. : [Mon Tue ... Sun]
and [1] are selected.
selects the day of Pressing
the setting number.
manuals search engine
3
Press
Pressing
selects ON/OFF timer.
Pressing
deletes timer setting.
* Hold down the button to change the time quickly.
Press
other days and/or numbers.
4
Press
Note:
• Press to transmit the setting information of weekly timer to the indoor
unit. Point the remote controller toward the indoor unit for 3 seconds.
• When setting the timer for more than one day of the week or one number,
does not have to be pressed per each setting. Press
ter all the settings are complete. All the weekly timer settings will be saved.
• Press to enter the weekly timer setting mode, and press and hold
for 5 seconds to erase all weekly timer settings. Point the remote
controller toward the indoor unit.
5
Press
* When the weekly timer is ON, the day of the week whose timer setting
is complete, will light.
Press
goes out.)
Note:
The saved settings will not be cleared when the weekly timer is turned OFF.
Checking weekly timer setting
1
Press
* blinks.
.
2
Press
day or number.
Press
Note:
selects
When all days of the week are selected to view the settings and a different set-
ting is included among them,
, , and to set ON/OFF, time, and temperature.
E.g. : [ON], [6:00]
Pressing
Pressing
adjusts the time.
adjusts the tem-
perature.
and to continue setting the timer for
to complete and transmit the weekly timer setting.
* which was blink-
ing goes out, and the
current time will be
displayed.
to turn the weekly timer ON. (
again to turn the weekly timer OFF. (
to enter the weekly timer setting mode.
or to view the setting of the particular
to exit the weekly timer setting.
will be displayed.
and [24°C] are
selected.
once af-
lights.)