Advanced Functions; Programming Modes - Thrustmaster Run'N'Drive 3-in-1 Benutzerhandbuch

ADVANCED FUNCTIONS

ADJUSTING THE OPTICAL WHEEL'S SENSITIVITY
The optical wheel (2) has 2 sensitivity modes:
- Normal sensitivity (default mode)
- High sensitivity (must be adjusted)
• Adjustment for "High sensitivity" mode:
Steps
1
2
(Repeat this procedure each time you restart your console or disconnect the gamepad)
• Adjustment to return to "Normal sensitivity" mode:
Steps
1
2

2 PROGRAMMING MODES

The PRESET button and LED (9) allows you to view the type of programming selected:
AUTOMATIC (preprogrammed) or MANUAL (programmed by yourself). A single press of this button
allows you (even during the course of a game) to switch from one programming mode to another.
• "AUTOMATIC PRESET" (PRESET button OFF)
This represents the default programming: The functions of the optical wheel and the triggers are
preprogrammed, as are the positions of the buttons and the directions of the mini-sticks and of the D-Pad.
PLEASE REFER TO THE "AUTOMATIC PRESET" CONFIGURATION DIAGRAMS
• "MANUAL PRESET" (PRESET button GREEN)
This represents your own personal programming:
- The buttons, directions of the mini-sticks and of the D-Pad can either be:
- You can modify the programming to your liking and whenever you wish.
- The programming is automatically saved inside your gamepad (even when disconnected).
- When your "MANUAL PRESET" is clear, it is identical to the "AUTOMATIC PRESET".
Downloaded from www.Manualslib.com
Raise and hold the "UP" direction on the optical wheel
Press and release the MAPPING button (7)
The optical wheel is now more sensitive
Lower and hold the "DOWN" direction on the optical wheel
Press and release the MAPPING button (7)
The optical wheel has now returned to normal sensitivity (the default mode)
* Programmed on the optical wheel and on the triggers; or
* Switched between themselves.
manuals search engine
Action
Action
6/12
Color of MODE
button
Flashes Red
2 seconds
Color of MODE
button
Flashes Green
2 seconds