Oursson EM1500 Bedienungsanleitung Seite 15

to light up. Turn the steam control switch counter-
clockwise into the
to release the first steam, and then turn the switch back
0
to position.
Turn the steam control switch gently.
When the steam releases from the pipe, a small
splashing of hot water may occur. In addition, the
pipe reaches high temperatures. Do not touch it
with bare hands.
3. Take a separate container and pour approximately 90-
100 ml. of milk for one portion of cappuccino. Note, that
in the preparation process milk will increase by about
2-3 times.
Milk must be cooled.
4. Place the container with milk under the pipe to make
cappuccino, Pic. D-11.
5. Immerse the pipe into the milk for about 2 cm, turn the
steam control switch counterclockwise to
for about 1-1,5 min. Milk will increase in size and will
become cream-like.
Maximum recommended steam release time is
no more than 1,5 min.
6. When the milk is doubled in size, continue to heat it up.
Ideal temperature is 60°С. After reaching the required
temperature, stop the steam release by turning the
0
switch clockwise to
7. Pour the whipped milk into the cup with coffee. If nec-
essary, add sugar to your taste and sprinkle milk foam
with cocoa powder or chocolate.
NOTE:
If you want to make coffee after whipping milk, it is nec-
essary to cool the boiler, otherwise the coffee will burn.
Clean the steam pipe after every use. Follow
the instructions to avoid getting burned.
Water heating (for tea and etc.)
1. Plug in the device. Press
fee machine, the red indication will light up.
2. M akes sure the button is not pressed and press the
button. The pump will start to pump the water. When
water will start to flow through the coffee outlet press
the button again.
3. Press button and wait for the yellow steam indica-
tion to light up. This means that the boiler reached
the required temperature
4. Take a container or a cup with liquid that needs to be
heated. Place the cup under the steam pipe. Immerse
the pipe into the liquid for about 2 cm.
When the steam releases from the pipe, a
small splashing of hot water may occur. In ad-
dition, the pipe reaches high temperatures. Do
not touch it with bare hands.
position, Pic. D-10, for 10-15 sec.
position.
, button to turn on the cof-
5. Gradually turn the steam control switch to
Pic. D-10.
6. After reaching the required temperature, stop the
steam release by turning the switch clockwise to po-
sition. Take the cup with heated liquid.
CLEANING AND MAINTENANCE, Рiс. E
Clean all the parts of the device immediately af-
ter use.
• Unplug the device and let it cool completely. Filters
4
, , filter holder
grid wash with warm water and detergent. You can-
not wash coffee machine parts in the dishwasher.
• Wipe the body of the device with damp cloth.
• N ever immerse the body of the device into the
water to avoid electric shock.
• A fter cleaning, thoroughly dry all elements of the de-
vice.
CLEANING THE STEAM PIPE, Рiс. Е-1
Clean the steam pipe after every use..
position
1. Place an empty container under the steam pipe
button must be pressed. Gradually turn the steam
control switch counterclockwise to
press
onds, then press
to position.
2. Press
coffee machine or wait until it turns off automatically.
3. Wait a few minutes for the steam pipe to cool down.
Remove the nozzle from the steam pipe by slightly
turning it around the axis. Wash it with warm water and
wipe dry.
4. Make sure that all openings are not clogged, clean
them with a needle if necessary.
5. Wipe the pipe with a dry soft cloth.
6. Install the nozzle back onto the pipe. Make sure it is
installed correctly.
CLEANING THE DRIP TRAY
It is recommended to periodically clean the drip tray.
Carefully slide the drip tray. Remove the grid. Drain the
accumulated liquid. Rinse the grid and the tray with warm
water and detergent. Wipe with a dry cloth and place the
drip tray with grid back into the coffee machine.
CLEANING FILTERS AND FILTER HOLDER
It is recommended to clean the filters approximately after
every 300 cups of coffee. Remove the filter from the filter
holder. Wash it with hot water, wiping it with a brush. Make
sure that all openings in the filters and filter holder are not
clogged. Clean them with a needle if necessary, Pic. E-3.
Do not wash them in dishwasher.
CLEANING THE BOILER MESH, Рiс. Е-2
It is recommended to clean the boiler mesh once a
year. Unplug the device and let it cool completely. Us-
3
, measuring spoon
button. Drain the water for about 30 sec-
button again. Turn the switch
button, then press button, to turn off the
position.
2
5
, tray and tray
position and
15