Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Short description of the mainboard
Installing/removing or replacing processor
(with heat sink)
Technical data
•
AMD Athlon 64, Athlon 64 X2 and AMD Sempron with up to 1 GHz Front Side
Bus (Hypertransport) in AM2 design (mPGA 940)
•
A current list of the processors supported by this mainboard is available on the
Internet at: "www.fujitsu-siemens.com/mainboards".
Procedure
► Remove the fan (if present) and the heat sink.
► Pull the lever in the direction of the arrow (1) and lift it as far as it will go (2).
► Fold up the frame.
► Remove the old processor from the slot (3).
► Insert the new processor in the socket so that the angled corner of the processor matches
the coding on the socket (A) with regard to the position (4).
9
Downloaded from
www.Manualslib.com
Disconnect the system from the mains voltage before performing any of the tasks
described below. Details are contained in the operating manual of your system.
2
3
1
The angled corner of the processor can also be located in a different
position than the one shown in the illustration.
manuals search engine
4
5
A
edition 1
Werbung
Inhaltsverzeichnis
