Toro Power Plex 51132 Bedienungsanleitung Seite 9

Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
Note:
The battery pack is not fully charged when you purchase it. Before using the tool for the first time, refer
to Charging the Battery Pack (page
1
Mounting the Battery
Charger (Optional)
No Parts Required
Procedure
If desired, mount the battery charger securely on a
wall using the wall-mount key holes on the back of
the unit.
Make sure to mount it indoors (such as a garage or
other dry place), near a power outlet, and out of the
reach of children.
Refer to Figure 1 for assistance in mounting the
charger.
Note:
Slide and twist the charger over the
appropriately positioned hardware to secure the
charger in place.
Description
No parts required
Connector knob
Auxiliary handle
Guard
Phillips head screw
11).
Qty.
–
Mount the battery charger.
1 Unfold the handle.
1 Install the auxiliary handle.
1
Mounting the guard to the base of the
trimmer.
4
7
Use
Figure 1
g194202