Call Transfer - Yealink SIP-T48G Schnellstartanleitung

Using the speakerphone:
or tap the End Call soft key.
Press
Using the headset:
Tap the End Call soft key.
Redial
• Press
• Press
Call Mute and Un-mute
• Press to mute the microphone during a call.
• Press again to un-mute the call.
Call Hold and Resume
To place a call on hold:
Press or tap the Hold soft key during an active call.
To resume the call, do one of the following:
• If there is only one call on hold, press
• If there is more than one call on hold, tap the call you want to resume, and then press
tap the Resume soft key.

Call Transfer

You can transfer a call in the following ways:
Blind Transfer
1. Press
2. Enter the number you want to transfer to.
3. Press
Semi-Attended Transfer
1. Press
2. Enter the number you want to transfer to, and then press
3. Press
Attended Transfer
1. Press
2. Enter the number you want to transfer to, and then press
3. Press
Call Forward
To enable call forward:
1. When the phone is idle, tap
2. Select the desired forward type:
Always Forward----Incoming calls are forwarded unconditionally.
Busy Forward----Incoming calls are forwarded when the phone is busy.
No Answer Forward----Incoming calls are forwarded if not answered after a period of time.
3. Enter the number you want to forward to. For No Answer Forward, tap the pull-down list of
After Ring Time, and then tap the desired ring time to wait before forwarding.
4. Tap the Save soft key to accept the change.
Call Conference
1. Tap the Conference soft key during an active call. The call is placed on hold.
Downloaded from www.Manualslib.com
to enter the Placed call list, and then tap the desired entry.
twice when the phone is idle to dial out the last dialed number.
or tap the Transfer soft key during an active call. The call is placed on hold.
or tap the Transfer soft key.
or tap the Transfer soft key during an active call. The call is placed on hold.
or tap the Transfer soft key when you hear the ring-back tone.
or tap the Transfer soft key during an active call. The call is placed on hold.
or tap the Transfer soft key when the second party answers.
->Features->Call Forward.
manuals search engine
or tap the Resume soft key.
.
.
E
N
G
L
I
S
H
or
5