Network Configuration (Ethernet Model Only) - Axas Class M Bedienungsanleitung

User Manual Full HD Hybrid Set top box

10) Network Configuration (Ethernet model only)

Set top box is integrated with standard 10/100Mbps Ethernet with RJ 45 connector. You are recommended to
use this network capability of Set top box to fully enjoy the system. You can set up the network settings through
Network Configuration menu.
Select the Menu > NETWORK > Network Configuration menu.
In the Network Configuration menu, you will see sub menus as following picture.
The easiest way to configure the network settings is to assign a dynamic IP address to the digital receiver by
setting the IP Connection Type option to DHCP. It will automatically detect the correct IP address.
When the digital receiver is restarted, the dynamic IP address could be changed more often than not, and you
will have to check what it is to access the digital receiver. To avoid this cumbersome thing, you had better assign
a Static IP address rather than dynamic one.
To assign a static IP address, set the Connection Type option to Static, then the IP Address, Subnet Mask,
Gateway, Primary DNS and Secondary DNS options become enabled. You have to set these options to match
with the configuration of your router.
14
Downloaded from www.Manualslib.com manuals search engine