auna multimedia Darkstar Anwendungshinweise Seite 11

• The switched power cord may be obtained an auto antenna cord of the car stereo.
3. Connection of Booster Input (High Input)
• This unit can be connected to any car stereo with high level outputs, common or separated ground
outputs.
• Separated ground car stereo connection;-connect car stereo speaker output cables to the high level
input connector (+) and (-), right and left polarity.
• Common ground car stereo connection;-connect car stereo speakers negative output cable to the
high level input connector to the two signs (-) and the remaining cables to (+) right and left..
4. Connection of AUX Input (Low Input)
• Connect the AUX input wires with RCA type pin jack as follows: white to L Ch pre—output of the car
stereo. Red to R Ch pre—output of the car stereo.
• Before connecting the pre—output of the car stereo or other unit, confirm the impedance or sensitiv-
ity to match with this unit AUX input.
• • Adjust the input sensitivity to output of a car stereo connected.
6. Connection of Speaker (Stereo / Mono)
• Connect the speaker wires as per the following figures
2-Channel
5. Input Sensitivity Control
11