Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Dear Customer,
Congratulations on purchasing this equipment. Please read this manual carefully and take care of the
following hints on installation and use to avoid technical damages. Any failure caused by ignoring the
items and cautions mentioned in the operation and installation instructions are not covered by our
warranty and any liability.
• 90W x 2 Channel/ 90W x 4 Channel/ 90W x 6 Channel
• Multi-mode connection capability for Simultaneous subwoofer & satellite speaker operation
• Adjustable subwoofer crossover frequency(3O—25OHz)
• High current discrete output devices
• Adjustable RCA level inputs
• Input ground isolation noise rejection circuit
• Ultra stable PWM (Pulse width modulated)
• Power supply (11~16V)
• Thermal Protection circuit
• Remote on power switching
• Transient noise muting
• Turn on delay
• Speaker short circuit protection
• Gold plate RCA input and terminals
• Chassis mount ATC fuse protectionGeräuschreduzierung
• Since this unit deals with a high power, large current will flow and the wiring or power cord is high
importance.
• Connect the red wire directly to the (+) terminal of the battery using the cord with a fuse holder sup-
plied.
• Connect the black wire tightly to an appropriate screw on the metal part of car after removing paint
for proper grounding. Be sure to use the screw not bring danger for driving.
• Proper connection will provide clear sound.
2. Connection of Remote On/Of Wire
• Connect the orange wire to a switched power cord of the car stereo to be connected to this unit will
control the unit power on/off with the car stereo' s
10
Features
Power Supply Section
General
1. Connection of Power Cord
Werbung
Inhaltsverzeichnis
