Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Remote Stop User Guide
Malfunctions
Description
Possible cause
The wheelchair is no longer
Distance between
reacting to the hand-held
wheelchair and hand-held
transmitter
transmitter too far
The hand-held transmitter
signal is being disrupted by
external influences
The battery of the hand-
held transmitter is too weak
The wheelchair battery is
too weak and the receiver
is not receiving a signal.
Replace the receiver fuse
There is a malfunction
between the receiver and
the hand-held transmitter
The wheelchair won't
The wheelchair batteries
switch on after being
are empty
stored for a long period
EN14
What you should do
Reduce the distance to the
wheelchair and check the
functions again
Test the hand-held
transmitter in an
interference-free
environment
Replace the battery of the
hand-held transmitter. (See
Power Supply)
Charge the wheelchair
batteries using the
wheelchair battery charger
Specialist wheelchair
knowledge is required to
change the fuse. Contact
your dealer
Contact your dealer
Charge the wheelchair
batteries using the
wheelchair battery charger
When storing the
wheelchair for a longer
period (more than 1
month), we recommend
that you disconnect the
wheelchair battery. Contact
your dealer
Manuel pour Arrêt à distance
Modèle
L' arrêt à distance se compose des composants
principaux suivants :
1. Émetteur portable : Marantec Digital 392 avec
2 canaux. Version 868 MHz
2. Récepteur : Marantec Digital 339.2
868 MHz
2a Fusible : 250 V, 250mAT, 20x5 mm (dans le boîtier)
3
Câble d'alimentation Curtiss Wright R-Net
4
Câble de blocage du fauteuil roulant Curtiss
Wright R-Net Inhibit
2
4
3
1
FR15
Werbung
