Information - Yamaha RM-CR Installationshandbuch

INFORMATION

About functions/data bundled with the product
• This is a class A product. Operation of this product in a residential environment could cause
radio interference.
• Refer to the website below for the licensing terms of the open source software used in this product.
U.S.A. and Canada
https://uc.yamaha.com/support/
Other Countries
https://download.yamaha.com/
• This product uses Dante Broadway.
Refer to the Audinate website (English) for details on the open source licenses for the
particular software.
https://www.audinate.com/software-licensing
• XLR-type connectors are wired as follows (IEC60268 standard):
pin 1: ground, pin 2: hot (+), and pin 3: cold (-).
®
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any
use of such marks by Yamaha Corporation is under license.
About this manual
• This Installation Manual uses the following signal words for the important information:
WARNING
CAUTION
NOTICE
IMPORTANT
NOTE
• The illustrations as shown in this manual are for instructional purposes only.
• The company names and product names in this manual are the trademarks or registered
trademarks of their respective companies.
• Software may be revised and updated without prior notice.
• The contents of this manual apply to the latest specifications as of the publishing date. To
obtain the latest manual, access the Yamaha website then download the manual file.
This content indicates "risk of serious injury or death."
This content indicates "risk of injury."
Indicates content that you must observe in order to prevent the
product from malfunctioning, being damaged, or operating
incorrectly, and to avoid data loss.
Indicates content that you must know in order to operate and use the
product correctly.
Indicates information that is related to operation and use. Read this
for your reference.
RM-CR Installation Manual
7