Safety Instructions; Transportation - Axis Communications YP3040 Installationsanleitung

YP3040 Pan-Tilt Motor

Safety Instructions

NO TICE TICE
NO NO TICE
• The Axis product shall be used in compliance with local laws and regulations.
• Store the Axis product in a dry and ventilated environment.
• Avoid exposing the Axis product to shocks or heavy pressure.
• Do not install the product on unstable poles, brackets, surfaces or walls.
• Use only applicable tools when installing the Axis product. Using excessive force with
power tools could cause damage to the product.
• Do not use chemicals, caustic agents, or aerosol cleaners.
• Use a clean cloth dampened with pure water for cleaning.
• Use only accessories that comply with the technical specification of the product. These
can be provided by Axis or a third party.
• Use only spare parts provided by or recommended by Axis.
• Do not attempt to repair the product yourself. Contact Axis support or your Axis reseller
for service matters.
NO TICE TICE
NO NO TICE
• Protect the power supply cable from any damage; pay special attention to plug fittings,
extensions and outputs.
• Install a surge protector to protect the motor from power surges.
• Avoid using excessively long installation wires in order to prevent fire or electrical shocks.
Important
• Keep the motor clear of unidentified objects or corrosive liquids since that may cause
the motor to short circuit.
• Do not touch the motor during operation.
• Do not install or operate the motor on dangerous sites that store inflammable or explosive
objects.

Transportation

NO NO TICE NO TICE TICE
• When transporting the Axis product, use the original packaging or equivalent to prevent
damage to the product.
www.a1securitycameras.com email: sales@a1securitycameras.com
Available from A1 Security Cameras
18