Troubleshooting - Axis Communications YP3040 Installationsanleitung

YP3040 Pan-Tilt Motor

Troubleshooting

Problem
YP3040 does not move
YP3040 moves when power
is applied, but is otherwise
unresponsive to commands
www.a1securitycameras.com email: sales@a1securitycameras.com
Probable cause
No power applied
Faulty connection in power
supply
Faulty RS485 cable connection
to network camera
PTZ functionality not enabled
in network camera
Available from A1 Security Cameras
10
Remedy
Check that power supply is
connected
Check that power supply
cable is intact and connected
correctly
Check that RS485 cable is
intact and connected correctly
Check that PTZ functionality
is enabled in Setup tools, see
Access the Product