Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance - AEG BHO18BL Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für BHO18BL:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 22
SPECIFIED CONDITIONS OF USE
The planer can plane surfaces and rabetts, and bevel and chamfer
edges.
Do not use this product in any other way as stated for normal use.
BATTERIES
Battery packs which have not been used for some time should be
recharged before use.
Temperatures in excess of 50°C (122°F) reduce the performance of the
battery pack. Avoid extended exposure to heat or sunshine (risk of
overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum life-time, the battery packs have to be fully charged,
after used.
To obtain the longest possible battery life remove the battery pack from
the charger once it is fully charged.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below 27°C and away
from moisture
Store the battery packs in a 30% - 50% charged condition
Every six months of storage, charge the pack as normal.
BATTERY PACK PROTECTION
The battery pack has overload protection that protects it from being
overloaded and helps to ensure long life.
Under extreme stress the battery electronics switch off the machine
automatically. To restart, switch the machine off and then on again. If the
machine does not start up again, the battery pack may have discharged
completely. In this case it must be recharged in the battery charger.
TRANSPORTING LITHIUM BATTERIES
Lithium-ion batteries are subject to the Dangerous Goods Legislation
requirements.
Transportation of those batteries has to be done in accordance with
local, national and international provisions and regulations.
• The user can transport the batteries by road without further
requirements.
• Commercial transport of Lithium-Ion batteries by third parties is subject
to Dangerous Goods regulations. Transport preparation and transport
are exclusively to be carried out by appropriately trained persons and
the process has to be accompanied by corresponding experts.
When transporting batteries:
• Ensure that battery contact terminals are protected and insulated to
prevent short circuit.
• Ensure that battery pack is secured against movement within
packaging.
• Do not transport batteries that are cracked or leak.
Check with forwarding company for further advice
ADVICE FOR OPERATION
Never reach into the danger area of the plane when it is running.
Place the front page of the machine on to the worpiece and switch on,
before the planer blade touches the workpiece and then guide evenly
over the workpiece.
The selv opening swivel guard should be lifted only by the workpiece or
with the lever.
The v-shape notch in the front of the supporting plate ensures safe
chamfering of edges.
When using the grooved planer blades, always use two blades with a
diff erent number of grooves.

MAINTENANCE

The ventilation slots of the machine must be kept clear at all times.
If the shavings discharge is stained with resin, remove it with a cloth
soaked in turpentine substitute.
Use only AEG accessories and spare parts. Should components need to
be replaced which have not been described, please contact one of our
AEG service agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state the
Article No. as well as the machine type printed on the label and order the
drawing at your local service agents or directly at: AEG
Elektrowerkzeuge, Max-Eyth-Straße 10, D-71364 Winnenden, Germany.
470 229 - BHO18BL.indd 21
470 229 - BHO18BL.indd 21
SYMBOLS
CAUTION! WARNING! DANGER!
Remove the battery pack before starting any work on the
machine.
Please read the instructions carefully before starting the
machine.
Wear gloves!
Wear ear protectors!
Always wear goggles when using the machine.
Accessory - Not included in standard equipment, available
as an accessory.
Do not dispose electric tools, batteries/rechargeable
batteries together with household waste material.
Electric tools and batteries that have reached the end of
their life must be collected separately and returned to an
environmentally compatible recycling facility.
Check with your local authority or retailer for recycling
advice and collection point.
n
No load speed
0
V
Volts
Direct current
Rotation direction
European Conformity Mark
Ukraine Conformity Mark
EurAsian Conformity Mark
ENGLISH
21
21.03.2019 09:15:54
21.03.2019 09:15:54

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis