Brake Pads - AsViva EM1 Betriebsanleitung

OPERATION
CHECKING THE BRAKE PADS
Indicator
The front and rear brake pads must be checked for wear at regular intervals.
Every brake pad has wear indicator grooves.
If a brake pad is so worn that the grooves on the wear indicator have largely disappeared, have the
brake pads replaced by a dealer as a set.
BRAKE FLUID
Front Brake Fluid
Minimum level mark
The vehicle uses the disc brake. Adjustment is finished before delivery. Contact dealer if any problem.
Don't forget to check the amount level in the brake fluid reservoir.
Add appropriate brake fluid if necessary.
Recommended brake fluid
DOT 4
Boiling temperature [° C] ≥ 230
Wet boiling point [° C] ≥ 155
Viscosity at 100 ° C [mm2 / s] ≥ 1.5
Cold viscosity at −40 ° C [mm2 / s] ≤ 1800
30
Rear Brake Fluid
LOWER