Inhaltsverzeichnis
Werbung
Höcherl & Hackl
GmbH
Analog Setting:
0 ... 10V
0 ... 5V for:
Accuracy:
Current:
Voltage:
Power:
Trigger Voltage
Current Limit
Input Impedance: >10kOhm
Preset function:
Accuracy:
Monitor Outputs:
0 ... 10V for
Accuracy:
Modulator:
Time Setting:
Accuracy:
Protection:
Elektronische Lasten Serie ZSLV
Electronic Loads Series ZSLV
Current Setting
Voltage Setting
Power Setting
Trigger Voltage
Current Limit
0.3% of Setting, 0.1% of current range
0.2% of Setting, 0.1% of voltage range
2.5% of Setting, 1% of power range
1% of Setting, 0.3% of voltage range (only ZS08)
1% of Setting, 0.3% of current range (only ZS08)
Current, Voltage, Resistance, Power and Frequency with
display for A, V, , W or Hz
0.4% in addition to the specified accuracy of selected mode
220A
30V
1000W
Current:
0.3% of Setting, 15mV
0.2% of Setting, 15mV
Voltage:
2.5% of Setting, 30mV
Power:
in Current, Voltage and Power Mode
0 ... 1000ms in two ranges
0.5% of time range, 1% of setting
Power limitation with Status LED
Current limitation with Status LED
Over-voltage protection with Status LED
Over-temperature protection with Status LED
Transient protection by Avalanche Diodes
Reverse polarity protection up to max. load current
No reverse polarity protection when Zero Volt Option is
installed
116
Bedienungsanleitung
Operating Manual
0 ... 100%
0 ... 100%
0 ... 100%
0 ... 100% (only ZS08)
0 ... 100% (only ZS08)
Werbung
Inhaltsverzeichnis
