Herunterladen Inhalt Inhalt Diese Seite drucken

OdontoKoala Koala-Intro Bedienungsanleitung Seite 9

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

INTRODUCTION
Dear Customer, thank you for choosing a Odontoko-
ala product. This manual contains all the informa-
tion you will need for the installation of the product
and its correct maintenance.
We are certain that you will be able to personally
appreciate our dedication to creating a quality
product.
For any questions, suggestions or requests, please
do not hesitate to call or write us: we look for ways
to better satisfy our customers every day.
RECOMMENDATIONS
Read this manual carefully before using the device.
For any questions or explanations about using the
machine and the safety requirements, we recom-
mend that you contact your reseller.
The manufacturer will not be liable for personal
injury or property damage resulting from a failure
to follow the rules listed in this manual.
The purchaser is responsible for making sure that
those using the product are aware of the instruc-
tions in this manual. The purchaser will be consi-
dered totally responsible for any changes made to
the device. Thanks to the simplicity of the product,
Koala can be installed, operated and maintained
directly by the purchaser.
ENVIRONMENTAL CONDITIONS AND OPERATING LIMITS
Koala is suitable for treating water distributed by
the public water system or, in any case, perfectly
potable.
Koala must only be installed on the cold water line.
The device is intended to be installed indoors,
in a protected place that is easily accessible for
maintenance.
Limiting environmental conditions:
Minimum ambient temperature: 5 °C
Maximum ambient temperature: 50 °C
Minimum water temperature: 5 °C
Maximum water temperature: 45 °C
Maximum relative humidity: 95%
Ultramulecular TECHNOLOGY
The high selectivity of the Ultramulecular cartrid-
ge, developed by Odontokoala in collaboration with
the largest multinationals in the water treatment
sector, provides an impassable barrier for micro-
organisms and absolute selectivity of suspended
microparticles. Together with the absorbent fun-
ction of the active carbon, Koala is able to remove
chlorine and bad odors and tastes. You will thus
have 8,000* liters of tasteless, odorless, colorless
and bacteriologically pure water.
Its efficiency, ecological safety and low consum-
ption, combined in a single technology, will make
even the smallest system see, big.
THE MANUFACTURER
Our production plants are located in the European
Union.
The manufacturer of reference is:
Odontokoala Via Della Mendola, 58 - 00135 Roma
Odontokoala checks that every supplier of compo-
nents and raw materials operates with respect for
the environment and the dignity of its workers.
*This value was established based on the following test conditions:
salinity of the entering water 250 ppm, softened water from the
public water system, temperature of 25 °C and average system
pressure of 2 bar. These values may vary depending on the characte-
ristics of the water supply.
ENGLISH
9

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis