Velleman CCTVPROM17 Schnelleinstieg Seite 4

Keep this manual for future reference.
DO NOT use this product to violate privacy laws or perform other illegal activities.
4. Overview
Refer to the illustrations on page 2 of this manual.
Front panel
LED
indicators
NAVIGATE
MENU
ENTER
LIST
PLAY
SLOW
ZOOM
SEQ
1 – 8
AUDIO
P.T.Z.
USB port
(2x)
Rear panel
VIDEO IN
MONITOR
CALL
AUDIO IN
AUDIO OUT
LAN port
HDMI
VGA
V. 02 – 28/08/2013
Downloaded from www.Manualslib.com
HDD is reading or recording.
DVR is powered on.
Press one of the four positions on the navigate button to move the cursor
up (
In playback mode, press the buttons to play/pause (
fast rewind (
In setting mode, press the up (
setting in the menu.
Press MENU to enter the main menu.
Press ENTER to confirm the setting.
Press to quickly search the recorded files by event lists: RECORD / MOTION / ALARM / TIME, or
select FULL to show all the event logs.
To quickly search the time you want, select QUICK SEARCH. For more details, refer to the full
user manual.
Press to play the recorded video.
In playback mode, press to play the recorded file slowly.
In live or playback mode, press to enlarge the image of the selected channel.
Press to show all screens sequentially in full screen mode. Press again to quit.
Press to show the multiple channel display mode.
Press a button to select the corresponding channel.
= SLOW + ZOOM
Press SLOW and ZOOM simultaneously to select live or playback audio.
= SEQ. +
Press SEQ. and simultaneously to enter or exit PTZ control mode.
Connect a USB flash drive for video backup to the left USB port (
to the right port ( ).
Note: Do not connect two USB mice or two USB flash drives simultaneously.
Note: For a list of compatible USB flash drives, please refer to the appendices in the full user
manual.
8 video input channels to connect 8 external video sources e.g. cameras
1 video output channel to connect the DVR to the main monitor (composite)
Note: You can use the MONITOR, HDMI, and VGA output ports simultaneously.
connector for monitor specific for sequence display
4 audio input channels to connect four external audio sources, e.g. from cameras with audio
1 audio output to connect to an audio device, e.g. a speaker (mono)
Connect the DVR to a local network by plugging a network cable into this port.
Connect to the HDMI port of a monitor that supports HDMI video output.
Note: You can use the MONITOR, HDMI, and VGA output ports simultaneously.
Connect to the VGA port of a monitor that supports HDMI video output.
Note: You can use the MONITOR, HDMI, and VGA output ports simultaneously.
manuals search engine
CCTVPROM17
), down ( ), left ( ) or right (
) or fast forward (
4
).
), stop (
).
) or down ( ) button to change the
); connect a USB mouse
),
©Velleman nv