Direct Code Set Up - One for All URC-1031 Bedienungsanleitung

MODE
AUTO SWING
SWING
PS MODE
Downloaded from www.Manualslib.com
Aircon_11_Talen_2008:Opmaak 1

Direct Code Set Up

Setting up the UNIVERSAL AIRCON REMOTE using the
Direct Code Set Up.
Please study first the code list (page 57 - 58) and note all
codes corresponding your air-conditioner brand (for
MODE
FAN SPEED
example codes 369, 371, 142, 143, 144, 168, 167, 171, 309 and 250
for the brand TCL).
AUTO SWING DEV 1
In case that you your brand is not listed in the code list use
the"Auto search method"
MODE
FAN SPEED
SWING
DEV 2
MODE FAN SPEED
AUTO SWING
DEV 1
1.
PS MODE DEV 3
AUTO SWING
DEV 1
SWING
DEV 2
TIME
SWING
DEV 2
2.
SET
PS MODE DEV 3
PS MODE DEV 3
TIME
TIME
SET
3.
SET
4.
MODE
FAN SPEED
FAN SPEED MODE FAN SPEED
AUTO SWING DEV 1
AUTO SWING
DEV 1
SWING
DEV 2
If your air-conditioner doesn`t switch Off/On try the next code
SWING
DEV 2
corresponding to your brand (e.g. 371 for TCL).
PS MODE
DEV 3
DEV 3 PS MODE
TIME
5.
SET
TIME TIME
SET
4
manuals search engine
Select one of device keys (e.g. DEV 1).
Press and hold `SET` key for 3 seconds
and`SETUP` will blink twice on the display
and then "PRE-CODE` will be displayed.
Press `SET' to confirm.
Point the UNIVERSAL AIRCON REMOTE
towards your air-conditioner and use the
"arrow keys" to select the first code (from
the code list) corresponding to your brand
(e.g. 369 for TCL). Every selected code will
automatically send out its POWER function.
DEV 1
DEV 2
DEV 3
As soon as the air-conditioner switches Off/On
press `SET' to save the selected code and
'OK' will be displayed.
SET
WWW.ONEFORALL.COM
19-06-2008 12:54 Pagina 4