Common Interface; Installation And Connection; Connecting To Dish Lnb And Tv - Megasat HD 910 Premium Benutzerhandbuch

2.4 Common Interface

CAM (Conditional Access Module) und Smart Card nur für CI Model
If you want to enjoy watching scrambled broadcasting channels, purchase CAMs and
smart cards from a service provider (that is, program provider). However, broadcasting
channels from multiple service providers call for CAMs and smart cards as many. For
those who have only the CAMs smart cards provided by one service provider may watch
several broadcasting channels of the provider, not accessing other channels served by
other providers.
Please refer to manuals provided by service providers for details because the CAM and
smart cards are featured with unique menus, apart from menus given by STB.
Watching „Free-To-Air" channel is available regardless of the CAM and smart cards. As
service providers download new information to smart cards if necessary, those who have
CAMs and smart cards should always put the smart cards in proper slots.
ENGLISH
08

3. Installation and Connection

The following diagram shows you how to connect the HD receiver, TV, LNB and other
equipment, please read this first if you are not sure about the connection, and it will
guide you to the correct connection.

3.1 Connecting to Dish LNB and TV

You can connect one fixed dish LNB directly to the LNB IN, or connect at least two dish
LNB by DiSEqC Switch, you can also connect to HH mount dish LNB.
Dish
LNB
Coax cable
ENGLISH
TV
HDMI
09