Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Automatic Detector
Painting the detector head cover
4
Make sure that the color is applied evenly and avoid paint
thicknesses of over 0.1 mm. Proceed with further mounting
steps only when the paint has dried properly. Please also refer
to the paint's Technical Data and Safety Data Sheet available for
download from the online catalogue at www.boschsecurity.com.
Reassembling the detector head
1.
2.
Bosch Sicherheitssysteme GmbH
Apply the paint.
Press the detector's individual display into the designated
fasteners.
Place the detector head back into the detector head cover
and ensure that all four snap-fit hooks lock audibly into
place. The detector head cover has a protective mechanism
to prevent the detector head from being mounted
incorrectly. The detector head can only be mounted when
the plastic lug on the detector head cover is aligned with
the notch on the detector head.
Scope of application | en
2014.10 | 5.0 | F.01U.089.231
11
Werbung
