Using The Device - Gambit Tools GS 950 Bedienungsanleitung

We recommend that you wear safety gloves.
Wear ear protection as per the rules of the employer or the local authorities.
Sensible measures should be taken to keep the nose level as low as possible.
Uncouple the air hose while changing the accessories, during repair tasks or if the device is not being used.
Always check accessories for damage. Breakages and loose parts can cause damage. Keep rotating parts away from your body.
If you have long hair, wear a hair net; long hair can get caught in things and this can cause harm. Do not wear any loose clothing; it can get caught in things
and this can cause harm. Always wear appropriate clothing. Only use accessories which have been declared as suitable by the manufacturer and which
are suitable for this device.
The recommended minimum age for users of this device is 18 years.
Be aware of moving hoses; these can cause harm. A bursting or loose hose can move about uncontrollably and thereby cause harm. Connect the air supply
immediately.
Keep the work area clean and organised, or else people may trip over hoses. Avoid slippery floors; for on slippery floors people can quickly slip and get hurt.
This device is not for use in potentially explosive environments and is not isolated from electricity.
If any dust is generated during the use process, a risk analysis should be conducted. The user must wear suitable respiratory equipment, and skin contact
must be avoided.
Wear fitting, suitable clothing on the work premises.
Cold air outlets should be kept away from the body.
Note that pressurised air can cause harm.
Never aim the air outlet at your own body or the body of another person.
Do not install quick release couplings on the tool directly; these can dissolve. Locate at least 50 cm of air hose on the device with an impact-resistant hose
nipple.
The safety pin should be mounted in claw couplings.
Never exceed the maximum air pressure of the device.
Never carry the tool by the air hose.
Always wear a safety helmet when doing overhead work.
Workpieces and accessories can get hot and cause burns.
Use only specific air pressure hoses which are suitable for maximum air pressure.
BEFORE OPERATION
Only use accessories which are suitable for this device.
Use only the best accessories, for the lowest amounts of noise and vibration. Replace the accessory if noise or vibration increases. Do not use worn or ill-
fitting power sockets or extensions; this can increase vibration.
Accessories must be correctly fitted and secured, and the lock must be in good condition. Never use the device if it has a poorly functioning fuse, because
the accessory may fly uncontrollably under certain circumstances.

USING THE DEVICE:

Ensure that you are familiar with the work premises and the surroundings before you use it. Always follow the monitoring guidelines applicable on the work
premises and in the surrounding area.
Hold the device with both hands, with one hand on the handle and the other hand on the side handle (if there is one).
During use of the device, the user can be exposed to risks such as entanglement, impact, heat, vibrations, cuts, razing etc.: Always wear appropriate
protection gloves.
Users must be able to ensure physical monitoring of the weight, size and performance of the tool.
Always be prepared for normal and non-normal forces or movements of the tool.
Keep your body balanced, position your feet securely and stably.
If the air supply is interrupted, release the start button or lever.
When using the device, the user may experience unpleasant sensations in his / her hands, arms, shoulders, neck or other body parts.
If you experience uninterrupted or returning symptoms, like pains, increased heart rate, palpitations, burning sensations or stiffness: do not ignore these
warning signs. Stop working with the device, inform your employer and consult a doctor.
D NL GB F I
Page 10 air impact wrench
• • • •