Kress KI200 Handbuch Seite 11

2. Continuous measurement (Max/Min)
Press
measurement. The continuous
measurement symbol is shown on the
screen. At the same time, the maximum and
minimum distances measured are shown in
the display. Users can press
stop the function.
*This function will be stopped automatically
after 5 minutes of inactivity.
min.
3. Area measurement
Press
appears in the display. Press
take the first distance measurement (e.g.
length). Press
distance measurement (e.g. width). After the
second measurement, the results of area/
perimeter are shown in the main display.
4. Volume measurement
Press
in the display. Press
distance measurement (e.g. length).
Press again to take the second distance
measurement (e.g. width), and press
take the third distance measurement (e.g.
height).
After three measurements, the result of
volume is automatically shown in the
summary line.
button to activate continuous
once, the symbol
again to take the second
1. The first measurement
2. The second measurement
3. Perimeter
4. Area
twice, the symbol
or
max.
to
appears
to take the first
to
11
EN
to