Glow Fire Neptun Benutzerhandbuch Seite 8

STEP 6
A: While a person is holding the glass plate, remove the two screws on the top edge of the
fireplace with a screwdriver.
B: Carefully remove the front screen and place it on a clean, soft surface.
C: Remove the two wood screws and lift out the decoration set.
D: Place the plate (I) on the ledge in the opening on the front of the fireplace.
E: Arrange the decorative crystals or pebbles (F / G) on the plate in the desired position.
Q: Put the windscreen back on the firebox.
G: Align the tabs on the glass plate with the holes on the top of the fireplace. Insert the
screws back into the holes and tighten both with a screwdriver.
Operation
8