Glow Fire Neptun Benutzerhandbuch Seite 7

STEP 4:
Align the holes in the wall bracket (E) with the guide holes and drywall plugs. Wood screws (B)
through washers and holes in the wall bracket, then directly into the drywall plugs. Make sure
the bracket is level. Tighten all screws with a screwdriver.
STEP 5:
A: Lift up the fireplace (A) and align the hooks on the back. Carefully insert the
hooks
into the slots.
B: Attach the fireplace to the wall bracket with two M4x8 metal screws (D), one on
each side. Insert the screws through the chimney and into the side bracket wall
bracket. Tighten both screws with a Phillips screwdriver. The device can now be
plugged in.
7