Product Description; Operation - Rebel Mie-Rb-33B Bedienungsanleitung

13. Do not tamper with devices internal circuits. This
may lead to accuracy decrease or damaging the
device.
14. The device is intended for indoors use only.
15. Take out the batteries, if the device is not going
to be used for a long time..

PRODUCT DESCRIPTION

1. Display
2. Display backlight button
3. Measurement hold button
4. Rotary switch
5. Connection terminals

OPERATION

AC and DC measurement
1. Connect the red test lead to the VΩmA terminal.
2. Connect the black test lead to the COM terminal.
3. Set the rotary switch to proper voltage range.
4. Connect the test leads to a measured circuit.
5. Turn on the circuits power. The voltage and
polarization will show on the display.
*If the range is not known, set the range to highest and
gradually lower it, until getting the accurate measurement.
DC current measurement
1. Connect the red test lead to the VΩmA terminal. If
the measurement will be in 200 mA - 10 A range,
connect the red test lead to the 10 A terminal.
2. Connect the black test lead to the COM terminal.
EN
3
4
5
12
1
2
OFF
500
500 V
HOLD
200
200
V
20 2000u
A
2000
m 20m
200
200
m
m
200M 10
20M
OUT
200K
Ω 20K
200
2000
UNFUSED
MAX 10 sec FUSED
EACH 15 min 500mA MAX
10AMAX VΩ mA COM
CAT I 600V
CAT II 300V