For Your Safety - Fein ABS18 Q Handbuch

OBJ_BUCH-0000000368-001.book Page 21 Tuesday, February 12, 2019 1:39 PM
Symbol, character
*
(**)
***
Character Unit of measurement,
international
U
V
f
Hz
n
/min, min
0
n
/min, min
S
M... Nm
Ø mm
L dB
pA
L
dB
wA
L
dB
pCpeak
K...
2
m/s
2
m/s
h,D
2
m/s
h,ID
2
m/s
h
m, s, kg, A, mm, V,
W, Hz, N, °C, dB,
2
min, m/s

For your safety.

Read all safety warnings and all
WARNING
instructions. Failure to follow the
warnings and instructions may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future reference.
Do not use this power tool before you have
thoroughly read and completely understood this
Instruction Manual and the enclosed "General
Safety Instructions" (document number
3 41 30 465 06 0). The documents mentioned should
be kept for later use and enclosed with the power tool,
should it be passed on or sold.
Please also observe the relevant national industrial
safety regulations.
Explanation
Screw diameter
Weight according to EPTA-Procedure 01
Low speed
High speed
Reduce torque
Increase torque
The power tool can additionally be operated with deviating performance data in the
12 V and 14.4 V voltage classes.
may contain numbers and letters
Partially in delivery scope
Unit of measure-
ment, national
V
Hz
-1
, rpm, r/min rpm
-1
/min
Nm
mm
dB
dB
dB
2
m/s
2
m/s
2
m/s
2
m/s
m, s, kg, A, mm, V,
W, Hz, N, °C, dB,
2
min, m/s
Explanation
DC voltage
Frequency
No-load speed (with fully charged battery)
Impact rate
Torque (hard/soft screwdriving application)
Diameter of a round part
Sound pressure level
Sound power level
Peak sound pressure level
Uncertainty
Vibrational emission value according to
EN 62841 (vector sum of three directions)
Mean vibrational value for drilling in metal
Mean vibrational value for impact drilling in
concrete
Arithmetic mean value of the vibration total
values
Basic and derived units of measurement from
the international system of units SI.
Intended use of the power tool:
ABS18 Q (**) / ASCM18 QSW (**):
Hand-held cordless drill/driver for screwing in and
unscrewing screws and nuts, and for drilling and screw-
driving in metal, wood, plastic, ceramics in weather-
protected environments without water supply using
the application tools and accessories recommended by
FEIN.
ASB18 Q (**):
Hand-held cordless hammer drill for screwing in and
unscrewing screws and nuts, and for drilling and screw-
driving in metal, wood, plastic, ceramics, and for impact
drilling in concrete, stone and bricks in weather-pro-
tected environments without water supply using the
application tools and accessories recommended by
FEIN.
en
21