Philips LFH9160 Benutzerhandbuch Seite 21

the LAN Docking Station itself
• A flag indicates if all files (or only EOL
dictation files) will be uploaded to the FTP/
SFTP. For this setting to take effect, the LAN
Docking Station must be in charge of the file
upload settings!
• A flag that indicates whether the dictation
files will be deleted from the Digital Pocket
memo after they are uploaded to the FTP/
SFTP server by the LAN Docking Station. For
this setting to take effect, the LAN Docking
Station must be in charge of the file upload
settings!
• Any commentary data, including an office
name or description and a general comment
• The administration password of the LAN
Docking Station
• The date and time when the LAN Docking
Station was last used (a Digital Pocket Memo
was last connected)
D Note
Only online LAN Docking stations can be
administered from the Administration Tool.
Important
C
You should use the
the file menu of the Application tool) often to
refresh the status of the LAN Docking Stations
in your network.
5.6 Using the Initial Setup Installer to
install a LAN Docking Station
The Initial Setup Installer offers a comprehensive
and easy to use interface to initally configure the
User manual
Downloaded from www.Manualslib.com
RELOAD button (below
manuals search engine
settings of a LAN Docking Station. Follow the
steps below to install a LAN Docking Station.
Connect the LAN Docking Station to the
1
PC that is running the Administration Tool,
or to your LAN, via a crossed LAN cable.
Open the Initial Setup Installer by clicking on
2
the tool bar button.
Specify the current IP address of the
3
LAN Docking Station in the
field.
ADDRESS
4
IP SETTINGS
You can assign a static IP address to the
LAN Docking Station or have it use the
DHCP service on your network to obtain
an IP address automatically in the IP settings
panel of the Initial Setup Installer dialog
• Assigning an IP address via DHCP: To
have the LAN Docking Station obtain
an IP address automatically from the
DHCP server on your network, check the
OBTAIN AN IP ADDRESS AUTOMATICALLY
radio button. See
(DHCP)
address from DHCP
information.
• Assigning a static IP address: To assign
a static IP address to the LAN Docking
Station, check the
radio button and enter the IP
IP SETTINGS
address settings, including the IP address,
the subnet mask, the gateway address, and
the Domain Name Server addresses.
5
FTP SETTINGS
Enter the hostname and port of the server,
as well as the username, the password and
the path on the server. If the FTP server can
CURRENT IP
Assigning an IP
on page 13 for further
USE THE FOLLOWING
21