Philips LFH9160 Benutzerhandbuch Seite 11

The LAN Docking Station also creates a
"configuration" subdirectory in the file upload
directory and creates a file named MAC_config.
txt, where MAC is the MAC address of the
LAN Docking Station. These files contain
configuration information for the LAN Docking
Station and are used by the Administration Tool.
See LAN Docking Station Administration Tool
page 18 for more information.
4.4 Setting up the file upload user
account on your FTP server
Create a user account on your FTP server
that the LAN Docking Station will use to
upload dictation files. This user account needs
the following access rights to the file upload
directory:
• Create subdirectories
• Create and write files
• List directory contents
The user name and password for this user
account must be entered at the LAN Docking
Station configuration interface. See the next
chapter for details.
4.5 FTP settings
Once you have your FTP server set up, you
must configure the LAN Docking Station to use
it. To configure the FTP settings, follow these
steps:
Open the LAN Docking Station
1
configuration interface by entering its IP
User manual
Downloaded from www.Manualslib.com manuals search engine
address in your Web browser or using the
LAN Docking Station Administration
If your FTP server can accept secure (SFTP)
2
connections, check the
on the FTP settings panel. Otherwise, check
the radio button on the FTP settings
FTP
panel.
on Enter the domain name or IP address of
3
your FTP server into the
The FTP server does not have to be on the
the local area network. If you reference
the FTP server using its domain name,
make sure that at least one DNS server is
configured (see
on page 14) or that you are using DHCP
(see Assigning an IP address from DHCP
page 13).
Enter the port number of your FTP server
4
into the
FTP PORT
should be 21 for FTP or 22 for SFTP,
unless your FTP server is configured with a
nonstandard port number.
Enter the name of the FTP user account
5
into the
USERNAME
the user account you have set up to receive
dictation file uploads from the LAN Docking
Station. See
9 for more information.
Enter the password of the FTP user account
6
into the
PASSWORD
the password by typing it again into the
CONFIRM PASSWORD
Enter the path to the directory to receive
7
dictation files into the
field. If you want to use the default directory
of the user account, leave the field empty.
radio button
SFTP
FTP SERVER
Assigning a static IP address
field. The port number
field. This should be
Setting up the FTP server
field and confirm
field.
PATH ON SERVER
Tool.
field.
on
on page
11