Agilent Technologies 729-0800 Bedienungshandbuch Seite 57

Ion Pump Battery Power Supply / 87-900-111-01 (E)
Downloaded from www.Manualslib.com
Figure 7 Posizionamento batteria
1.
Check that the ON/OFF switch is set to OFF.
2.
Back off the 4 screws A.
3.
Open the cover of the unit.
4.
Remove the strip of Mylar inserted between the terminals of the
battery C and the contacts of the battery-holder.
5.
Replace the cover of the unit and re-insert the four screws A.
manuals search engine
4
Instructions for Use
Installation
57/68