Maintenance - CALOR 6341 Gebrauchsanleitung

10. MAINTENANCE

The appliance does not re q u i re any particular maintenance.
Use a soft cloth to remove dust.
ENG
Moisten the cloth to remove stains.
Clean the grills with a vacuum cleaner at least once per year.
For these operations, you appliance must be turned off .
I m p o rtant : never use abrasive products, which may damage the coating.
M o re thorough cleaning can only be carried out by an approved service agent
This operation is not covered by the guarantee.
Changing the power lead.
If the power lead is damaged, it must be replaced by an approved service centre, as special tools
a re needed to disassemble this appliance.
11. IN THE EVENT OF A PROBLEM
P ro b l e m
Your appliance does not
h e a t .
For any other problems, please contact an approved service centre (see enclosed list).
I m p o rtant : special tools are needed to repair this appliance.
Downloaded from www.Manualslib.com
C a u s e s
It is not plugged in.
The On/Off dial is on 0.
The thermostat position is
set too low compared with
the temperature in the
ro o m .
In the event of abnorm a l
heating, a safety limiter
automatically cuts out the
a p p l i a n c e .
E.g.: Excessive dust on air
vent (E).
manuals search engine
S o l u t i o n s
Plug it in.
Tu rn it to position .
Set the thermostat to a higher
s e t t i n g .
Tu rn the dial to position 0 and
eliminate the cause of overh e a t i n g .
When the temperature of the
appliance re t u rns to normal, turn
the appliance back on, by turn i n g
the dial to position .