Turning On The Appliance - CALOR 6341 Gebrauchsanleitung

3. WA R N I N G S
This appliance is designed for wall-mounted installation (see installation chapter 10).
Do not place it immediately below a wall power socket.
It must be installed so that the dials or other control devices cannot be touched by per-
s o n s taking a bath or shower.
This appliance is designed solely for domestic use. It cannot there f o re be used for industrial
a p p l i c a t i o n s .
Never insert anything inside the grill.
O b s e rve your appliance when turning it on for the first time.
It is nonetheless normal for a slight odour to be smelt when the appliance is turned on for the
first time or after cleaning (dust deposited on the appliance).
It complies with directives 73/23/EEC and 89/336/EEC.
4. SAFETY
I M P O RTANT :
The indicate «DO NOT COVER» on your appliance means that the air intake and outlet
grills must not be blocked during use and that nothing must be able to prevent air fro m
c i rculating fre e l y, otherwise the appliance dials to «SAFETY» mode.
«SAFETY» mode.
In the event of abnormal heating, a safety limiter automatically cuts out the appliance.
In this case, turn the B dial to 0, eliminate the cause of overheating and, once the temperature
of the appliance re t u rns to normal (approx. 15 min.), you can turn the appliance back on by tur-
ning dial B to position .
If the fault reappears when you turn the appliance back on, we recommend that you contact an
a p p roved service agent.
To cut the power supply to your appliance : t u rn the On/Off dial B to position 0.
5. USING THE APPLIANCE IN A BAT H R O O M
Please comply with applicable legislation.

6. TURNING ON THE APPLIANCE

a) Model 6342 (fig. 4).
Tu rn dial B to position .
- The appliance can then generate a maximum power of 2000 W, regulated according to the
position of the thermostat dial A.
- Your appliance will operate until you turn dial B back to position 0 : off .
Downloaded from www.Manualslib.com manuals search engine
ENG