Product Specifications; Packing List - Inateck KB02012 Handbuch

B. if you want to use Caps Lock Key in normal to switch the case of alpha Characters, please follow the steps to
change the iPad settings.
Find General-Keyboard-Hardware Keyboard: TURN OFF Caps Lock and Switch to/from Latin
C. Double click might generate full stop punctuation on iPad. If you encounter such condition while typing
Space key, please follow the steps below to change the iPad settings.
Find General-Keyboard-Hardware Keyboard: TURN OFF "." Shortcut
4. How to check battery status
Press + simultaneously, and judge the battery level by the flash times of Indicator 4.
Flash Times of Blue Light
1
2
3
4
5. Recharging
When the battery level is low, the indicator will flash in blue. If all the indicators are off, it means the battery
is completely drained. Under both situations, the keyboard should be recharged. The required charging
voltage is 5V with the current under 250mA. A current control chip is set inside the keyboard for overcurrent
protection. You can recharge the keyboard by using an ordinary phone charger or connect it to the USB port
of a computer that regularly outputs voltage at 5V. The keyboard can be fully recharged in approximately 3-4
hours. The indicator light goes off when the battery is full.
Note
You can use the keyboard while it is being recharged.
6. Sleeping mode
The keyboard will sleep automatically if there is no operation on it for 30 minutes. Wake it up by pressing
any button. Under sleep mode, Bluetooth will disconnect automatically, and you can build reconnection by
pressing any key.

7. Product Specifications

Bluetooth version
Effective range
Charging time
Working temperature
Bluetooth Operating Frequency
Bluetooth transmission power
Key press force
Battery capacity
Compatible iPad model

8. Packing list

KB02012*1
Micro-B Charging Cable*1
User Manual*1
Battery Level
0-25%
25%-50%
50%-75%
75%-100%
Bluetooth V3.0
10 m
3-4h
-10° -+55°
2402-2480MHZ
0dBm
60 ± 10g
650mAh
iPad 7/ iPad Air 3/ iPad Pro 10.5 inch
4