Product Overview - Inateck Kb02012 Handbuch

English

1. Product Overview

Pencil Slot
Status of Indicator 1
Keeps blue
Off
Status of Indicator 2
Blue light flashes
Status of Indicator 3
Keeps red
Status of Indicator 4
Keeps blue for 3s
Blue light flashes
Note：
To ensure that the iPad sleeps and wakes normally when close/open the keyboard case, please make the edge
of the keyboard in line with the indication line on the support panel.
2. How to pair an iPad
Step 1: Install iPad onto the Bluetooth keyboard
Step 2: Toggle the power switch to ON, and the Bluetooth keyboard starts.
Step 3: Press the "Connect'' key on the keyboard to enter Bluetooth pairing mode, when the Indicator 2 will
flash in blue.
Step 4: On the iPad, select Settings- Bluetooth- On.
Step 5: The iPad will display "Inateck KB02012" as an available device.
Step 6: Select "Inateck KB02012" on the iPad.
Step 7: Indicator 2 goes off, which means the keyboard has been paired with iPad successfully.
Meaning
Caps Lock Enabled
Caps Lock Disabled
Meaning
Under Bluetooth pairing mode, waiting for pairing, light goes off when paired successfully
Meaning
The keyboard being recharged. (Red light off when fully recharged)
Meaning
The keyboard starts.
Low battery level. (lower than 15%）
2
Bluetooth Connection
Power Switch
Micro-B Charging Port
Indicator 4
Indicator 3
Indicator 2
Indicator 1