Zoef Robot Inge ZB20B Handbuch Seite 24

c.
Indicators
Status
Switch on
Switch off
Cleaner is out of water
Cleaner is working in the
pool
Working cycle finished
(low battery)
Faults
3. Functions and adjustment of nozzles
There are two nozzles on the cleaner, one of them opens once the other closes. Water flows out
through the open nozzle to thrust the cleaner forward. Adjust the nozzle by turning it to control the
cleaner route.
a. Setting nozzle angle and cleaner route
The nozzles of the cleaner are marked with angles (0°-40°).
The cleaner moves in an approximately straight line when the nozzle angle is 0°.
The cleaner moves in a more curved line at a larger angle from 0°-40°.
Blue light is steady on
Red light flashes once then powers off
Blue light flashes rapidly
Blue light flashes
Red light stays steady on
Red light flashes
6
Indicator